Panel Antenna WiFi
The series of microstrip directional panel antennas for the 2.4 and 5 GHz frequency bands with the moderate gain, that is 8 dBi for 2.4 GHz and 14 dBi for 5 GHz. Antennas are 4 patches array etched on the suspended substrate, fed by appropriate developed microstrip line.
The one exception is the panel antenna TetraAnt 2 08 75 that is a single element design. The patch is connected directly to the connector, in the way providing a good matching to the 50 Ohm. Quality coaxial connectors are N (f).
and depends on the antenna model. This wide beam width can be the advantage when antennas are used intentionally as a sector antenna for small WiFi or WLAN internet networks.
It should be mentioned that the panel antenna TetraAnt 2 14 35 has reduced slightly (about 5 dB) the side lobe level, compared to the standard design. This helps to reduce the interference from other antennas.
But do not miss the best (in terms of the VSWR, the side lobe level and the cross polar discrimination) 2.4 GHz WLAN - WiFI microstrip panel antenna in our offer - and probably in the market - the TetraAnt 2 19 20 RSLL.
Despite the moderate gain, antennas was designed with the same great attention as our most sophisticated product - the test antenna TetraAnt 2200 - 2800 RSLL, and are assembled by Elboxrf.
Following models are available, price (each)