Enable browser cookies

MIMO Panel Antenna WiFi LTE

4x4, 3x3, and 2x2 MIMO directional panel antenna. WIFI and LTE

Elboxrf MIMO panel antennas operate over 2.3 - 2.7 GHz, 5 - 6 GHz or 5.4 - 6.5 GHz frequency bands, are H V, and +/- 45 degrees Slant (or 45 deg. Slant Left and 45 deg. Slant Right) polarized, and feature a peak gain 12, 19 or 23 dBi.

For a high-speed wireless communication - LTE - the TetraAnt 2 19 20 HV was developed. It operates over  2.3 - 2.5 - 2.6 GHz LTE bands, commonly used in LTE standard.

They are array antennas that have a set of radiating elements (the patch) connected together by microstrip lines. Depends on polarization planes, antennas have 2, 3 or 4 connectors, produced under Elboxrf's strict specifications. For example, pre-production samples were tested up to 12 GHz using our microwave equipment.

Antennas are weatherproof, stiff, and lightweight.

TetraAnt 5 19 20 XHV
  • 4x4, 3x3, 2x2 MIMO
  • Bandwidth up to 6.5 GHz
  • Small housing - 33x33 cm
TetraAnt 5 12 35 XHV
  • 3x3 MIMO
  • 2 pol. configurations
  • Small, low gain panel
TetraAnt 6 23 10 HV
  • Operational freq. 5.6 - 6.5 GHz
  • Gain 23 dBi
  • TetraBox available
TetraAnt 5 23 10 HV
  • Frequency band 5.1 - 6.0 GHz
  • Gain 23 dBi
  • TetraBox available
TetraAnt 5 19 20 HV
  • Frequency band: 5.1 - 6.2 GHz
  • Gain 19 dBi
  • TetraBox available
TetraAnt 2 19 20 HV
  • Covers 2.3 -2.5 - 2.6 GHz LTE bands
  • 2x2 MIMO
  • Peak gain: 18.5 dBi
  • HV or SLANT configuration